Winches & Pushing Machines
Our range of winches are designed to offer reliable, efficient performance, enabling your team to install a wide range of cabling both overhead and underground. Each designed to suit specific requirements, including trailer mounted winches and portable, lightweight capstans.
C-1045 Pull & Assist Winch
The C-1045 winch has been designed to meet the requirements of installing telecommunication cables, employing an 813mm diameter single capstan to impact a controlled force to the pulling rope or cable. The single capstan allows the winch to be placed at the mid point of a section to assist in the pull, thus enabling longer pulls to be achieved. The winch has a rope take up drum, which is driven independently via a hydraulic motor, and has a detachable side which allows the rope on the drum to be removed in a tidy coil. Maximum pulling capacity of 500kg.
C-680 Bulldog Overhead Line Winch
The CBS 680 Bulldog winch has been designed to provide a compact, transportable unit for overhead line stringing work. The self-contained winch is powered by an 11hp petrol engine and the precise control required is provided by the hydraulic circuit. There are drums for various applications and these are easily interchanged. The C-680 is a British Universal winch designed to meet the needs of overhead line engineers. The various options permit use on aerial bundle (ABC), Copper, Aluminium and ACSR Conductors.
C-821 Hydraulic Universal Winch
The CBS 821 Universal Winch offers the constant pulling tension of a double capstan drive and the flexibility of a direct drive drum in one machine. The winch employs a powerful petrol engine mounted with associated hydraulics on a sturdy trailer unit. The precise hydraulic controls allow easy operation through one fail-safe lever. Ideally suited for ABC erection, 11/33kV stringing work conductor recovery and underground cable handling.
C-825 Portable Hydraulic Winch
The CBS 825 is designed to provide a fully portable winching system, by breaking down into easily transportable modules. Ideally suited for overhead line stringing work such as ABC conductors, bare conductors or re-conductoring projects, it provides a flexible system suitable where access is restricted and ground disturbance is undesirable.
C-780 Overhead Line Construction Winch
The C-780 has been designed to give a reliable, flexible winching system to meet all 11/33kV work, together with some 66kV and 132kV maintenance requirements. The system employs a range of drums to suit particular applications. The powered hydraulic drum lifting device, together with hydraulic stabilising jacks provides safe drum handling. Hydraulic layering device fitted as standard. Available in 3 tonne or 4 tonne lifting capacity.
W1-TEW25H-01 Tower Erection Winch
The TEW25H-01 is a hydraulically driven self-powered drum winch, popular with power line and telecommunications contractors. The TEW25 winch has been designed to comply with all the relevant safety requirements for lifting loads. Two fully automatic, fail safe braking systems are incorporated into the unit. In the unlikely event that the chain fails the second braking system would automatically apply, holding the load securely. The winch has a maximum lifting capacity of 2.5 tonne.
W1-TEW50H-01 Tower Erection Winch
The TEW50 is a hydraulic winch designed to provide reliable and safe lifting operations for tower and mast erection for the electricity or telecommunications industries. Winching is controlled via a proportional hydraulic valve giving the operator precise control over the load when needed or high speed if necessary. The winch has a maximum lifting capacity of 5 tonne.
C-1210 Single Capstan Winch
The C-1210 Single Capstan Winch has been designed to provide a light and powerful universal winch. Ideally suited for hoisting loads up poles or transmission towers or for pulling cables and conductors. The rope locking device eliminates the need to tie off the rope. A remote foot control switch operates the 115 volt electrically powered winch. Has a maximum lifting capacity of 450kg.
C-1210-500-1 Petrol Capstan Winch
The C-1210-500-1 Petrol Capstan Winch is lightweight at just 8.5kg, thus enabling easy handling and smooth running. The unit is powered by a Honda 4-stroke engine that can operate in any position. It can be operated using a lightweight synthetic rope of any length, which can be transported or stored easily using the transport bag. Has a maximum pulling capacity of 500kg, a 350kg version is also available with an extended capstan.
C-1035 Lightweight Capstan Winch
The C-1035 Lightweight Capstan is a highly reliable, low maintenance winch designed for use over manholes. Powered by a Honda Engine through a right angle gearbox. The C-1035 has a 5.5HP Engine. The C-1035-10 has an 8HP Honda Engine. The units have a pulling capacity of 500kg and 1000kg respectively.
C-1350 Cable Pusher
The C-1350 Cable Pusher has been designed to assist the laying of electrical cables or cylindrical elements. The unit has a profiled drive system to grip the cable, with a load applicator of adjustable upper rollers. The drive system is hydraulic, and is powered by a the lightweight C-1203-F portable trolley mounted hydraulic power pack, with pre-set internal system protection relief valve and quick release connections.