+44 1572 723 665 sales@cbsproducts.com
CBS Running Out Blocks

CBS Running Out Blocks

CBS Running Out Blocks

The CBS range of running out blocks have been designed to suit almost every application when it comes to working at height with poles, cross arms and conductors of any size.

D-687 Double Sheave Running Out Block

Designed to be strong but light, the D-687 is ideally suited for pole work. The aluminium sheaves are mounted on sealed ball bearings for low resistance. 500kg SWL.

D-685 Single Offset Sheave Running Out Block

This block has the same features as the CBS 687 but with a single sheave which is offset to assist with fixing the conductor to the clamp. 300kg SWL.

D-686 Intermediate Running Out Block

The D-686 has a split frame and hooks to locate on to brackets. The aluminium sheave is mounted on sealed ball bearings while guide rings protect the conductor from damage. 300kg SWL.

D-793 Rear Pole Roller Block

The D-793 has been designed to be suitable for stringing conductors at the rear of an angle pole. 600kg SWL.

D-798 Pole Traversing Block

The D-798 block allows the stringing operation to be fed up or down poles, when access at the rear of the pole is not available. The block has a 260mm sheave with quick acting ratchet fixing and a conductor side gate. 1,200kg SWL.

D-694-2 Straight Crossarm Running Out Block

The D-694-2 has been designed to mount onto crossarms upto 100mm angle. Sheaves are fitted with sleeve bearings. Unit comes complete with uplift roller to prevent conductor lifting out. 350kg SWL.

D-807 Crossarm Running Out Block

The D-807 has been designed to mount onto angle crossarms up to 100mm. Sheaves are fitted with sleeve bearings. This design allows conductors to be strung around route deviations. 300kg SWL.

D-861 Angle Crossarm Running Out Block

The dual pin on the D-861 allows the nylon top roller to be opened from either side when inserting conductor. Suitable for crossarms up to 150mm angle. 300kg SWL.

D-862-1 Crossarm Angle Roller

The adjustable angle facility of the D-862-1 allows the sheave to position through 180º in 45º increments. Fits crossarms up to 150mm angle. Nylon roller fitted. 400kg SWL.

D-683 Running Out Block

The D-683 is ideally suited for mounting onto crossarms up to 150mm angle, conductor-retaining pin is provided. 300kg SWL.

D-733 & D-917 Insulator Mounted Running Out Block

The D-717 blocks are suitable for 33kV insulator, while smaller the
D-917 is suitable for 11kV insulator. Each has two sheaves for stringing, which are lowered for making off onto insulator.
The D-733 is designed to fit insulators from 115 – 135mm, whilst the D-917 is designed to fit insulators from 70 – 90mm. 150kg SWL.

Single Sheave Aluminium Suspension Block

Single sheave aluminium suspension blocks with spring-loaded safety gate & steel zinc plated side frames. Neoprene lining of groove is available on request. Available with either a Rotating Oval Eye or a Tongue Mounting (Clevis). There are 2 sizes available depending on what diameter conductor is being used, both 2,400kg SWL.

Hole Mounted Single Sheave Suspension Block


These aluminium suspension blocks have an automatic safety gate and steel side frames. They are hole mounted to fit insulator clevis with 2,400kg SWL. The D-691 is the smallest in the range, The D-736 will accommodate larger conductors, D-1061 comes with a shackle in the hole mounting.

Sagging Blocks

Designed to fit tower cross arm to accept wire rope for sagging conductor. The D-668 swivel block comes in 3 different sizes with SWL of 2,000kg, 3,500kg or 5,000kg. The D-670 straight block has 2,000kg SWL.

D-717 Tandem Sheave Suspension Block

The D-717 comes with an automatic safety gate and steel side frames. There is the option to add a slip ring for earthwire earthing. 4,000kg SWL.

CBS Winches and Pushing Machines

CBS Winches and Pushing Machines

Winches & Pushing Machines

Our range of winches are designed to offer reliable, efficient performance, enabling your team to install a wide range of cabling both overhead and underground. Each designed to suit specific requirements, including trailer mounted winches and portable, lightweight capstans. 

C-1045 Pull & Assist Winch

The C-1045 winch has been designed to meet the requirements of installing telecommunication cables, employing an 813mm diameter single capstan to impact a controlled force to the pulling rope or cable. The single capstan allows the winch to be placed at the mid point of a section to assist in the pull, thus enabling longer pulls to be achieved. The winch has a rope take up drum, which is driven independently via a hydraulic motor, and has a detachable side which allows the rope on the drum to be removed in a tidy coil. Maximum pulling capacity of 500kg. 

C-680 Bulldog Overhead Line Winch

The CBS 680 Bulldog winch has been designed to provide a compact, transportable unit for overhead line stringing work. The self-contained winch is powered by an 11hp petrol engine and the precise control required is provided by the hydraulic circuit. There are drums for various applications and these are easily interchanged. The C-680 is a British Universal winch designed to meet the needs of overhead line engineers. The various options permit use on aerial bundle (ABC), Copper, Aluminium and ACSR Conductors.

C-821 Hydraulic Universal Winch

The CBS 821 Universal Winch offers the constant pulling tension of a double capstan drive and the flexibility of a direct drive drum in one machine. The winch employs a powerful petrol engine mounted with associated hydraulics on a sturdy trailer unit. The precise hydraulic controls allow easy operation through one fail-safe lever. Ideally suited for ABC erection, 11/33kV stringing work conductor recovery and underground cable handling.

C-825 Portable Hydraulic Winch

The CBS 825 is designed to provide a fully portable winching system, by breaking down into easily transportable modules. Ideally suited for overhead line stringing work such as ABC conductors, bare conductors or re-conductoring projects, it provides a flexible system suitable where access is restricted and ground disturbance is undesirable.

C-780 Overhead Line Construction Winch

The C-780 has been designed to give a reliable, flexible winching system to meet all 11/33kV work, together with some 66kV and 132kV maintenance requirements. The system employs a range of drums to suit particular applications. The powered hydraulic drum lifting device, together with hydraulic stabilising jacks provides safe drum handling. Hydraulic layering device fitted as standard. Available in 3 tonne or tonne lifting capacity.

W1-TEW25H-01 Tower Erection Winch

The TEW25H-01 is a hydraulically driven self-powered drum winch, popular with power line and telecommunications contractors. The TEW25 winch has been designed to comply with all the relevant safety requirements for lifting loads. Two fully automatic, fail safe braking systems are incorporated into the unit. In the unlikely event that the chain fails the second braking system would automatically apply, holding the load securely. The winch has a maximum lifting capacity of 2.5 tonne.

W1-TEW50H-01 Tower Erection Winch

The TEW50 is a hydraulic winch designed to provide reliable and safe lifting operations for tower and mast erection for the electricity or telecommunications industries. Winching is controlled via a proportional hydraulic valve giving the operator precise control over the load when needed or high speed if necessary. The winch has a maximum lifting capacity of 5 tonne.

C-1210 Single Capstan Winch

The C-1210 Single Capstan Winch has been designed to provide a light and powerful universal winch. Ideally suited for hoisting loads up poles or transmission towers or for pulling cables and conductors. The rope locking device eliminates the need to tie off the rope. A remote foot control switch operates the 115 volt electrically powered winch. Has a maximum lifting capacity of 450kg.

C-1210-500-1 Petrol Capstan Winch

The C-1210-500-1 Petrol Capstan Winch is lightweight at just 8.5kg, thus enabling easy handling and smooth running. The unit is powered by a Honda 4-stroke engine that can operate in any position. It can be operated using a lightweight synthetic rope of any length, which can be transported or stored easily using the transport bag. Has a maximum pulling capacity of 500kg, a 350kg version is also available with an extended capstan.

C-1035 Lightweight Capstan Winch

The C-1035 Lightweight Capstan is a highly reliable, low maintenance winch designed for use over manholes. Powered by a Honda Engine through a right angle gearbox. The C-1035 has a 5.5HP Engine. The C-1035-10 has an 8HP Honda Engine. The units have a pulling capacity of 500kg and 1000kg respectively.

C-1350 Cable Pusher

The C-1350 Cable Pusher has been designed to assist the laying of electrical cables or cylindrical elements. The unit has a profiled drive system to grip the cable, with a load applicator of adjustable upper rollers. The drive system is hydraulic, and is powered by a the lightweight C-1203-F portable trolley mounted hydraulic power pack, with pre-set internal system protection relief valve and quick release connections.

Klein Tools Pole Climbing Irons

Klein Tools Pole Climbing Irons

Klein Tools has been providing occupational protective equipment to linemen since the first telegraph poles were strung. Klein’s spur type adjustable climbers make easy work of pole climbing.

Klein Tools has been providing occupational protective equipment to linemen since the first telegraph poles were strung. Klein’s Pole Climber set includes the pads, steel sleeves, leg irons, 1-1/2” gaffs, split rings and nylon calf and ankle straps. The secure sleeve and leg iron connections are adjustable in 1/4” (6 mm) increments. Contoured leg irons help position gaffs securely and comfortably. The replaceable gaffs firmly attach to the leg iron with a centre pin and two TORX® screws. High-grade leather climber pads are cushioned for maximum comfort. A complete range of spare parts and sharpening equipment are available. Klein components should not be interchanged with components made from other manufacturers.

Klein Canvas Lineman Tool Buckets

Klein Canvas Lineman Tool Buckets

Klein Canvas Lineman Tool Buckets.

CBS offer a range of Klein Canvas Lineman Tool BucketsKlein canvas buckets and accessories have been recognised for decades for their durability and dependability, they are built for strength to withstand even the harshest of conditions and handle professional wear and tear. Available in a wide range of sizes and and load ratings, with a choice of pockets, round or oval body or top closing for added security, Klein are bound to have the perfect bucket to suit your needs.

Klein Tools Insulated Tool Range

Klein Tools Insulated Tool Range

Klein Tools Insulated Tool Range

Klein insulated tools combine excellent functionality along with the reduction of risk of injury where a tool might make contact with an energised source with voltage up to 1000 volts.

Insulated Pliers

K-D213-9NE-INS High Leverage Side Cutting Pliers: These Klein Tools Side Cutting New England Insulated Pliers are insulated by two layers and pass both the IEC 60900 and ASTM F1505 standards. They are made of forged steel with induction-hardened knives for strength and durability and they have high-leverage design which provides 46-percent more cutting and gripping power than other plier designs. K-D2000-9NE-INS Heavy Duty version, also available, cuts ACSR, screws, nails and most hardened wire.

K-D2139NE-CR-INS Insulated High Leverage Side Cutting Pliers: These Klein Tools 9-Inch Insulated Side-Cutting Crimping Pliers offer protection against electric shock up to 1,000 volts. They offer maximum strength with their forged-steel construction and a crimping die helps provide increased leverage.

K-12098-INS High Leverage Universal Side Cutting Pliers: Be protected from up to 1,000 volts of electric current when working near energised sources with Klein’s 8-Inch Insulated Universal Combination Pliers. These pliers offer flame-retardant handles, a toothed pipe grip and a high-leverage crimping die. Quickly installs and removes spring-tension hose clamps. High-leverage design has 35-percent more cutting power. Grips with either side or end of jaws for work in confined areas. The durable, molded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools.

Insulated Long Nose Side Cutting Pliers: Klein Tools Insulated Long Nose Side-Cutting pliers are 1000V rated for safety on the job. The long nose is designed to grab and loop wire. Dual layer, orange-over-white insulation provides a warning sign that insulation may be compromised. The molded insulation meets or exceeds ASTM F1505-16 and IEC 60900:2012 standards for insulated tools. Cutting knives are induction hardened for long life. An 8″ version is also available with skinning hole.

K-D220-7-INS 7″ Insulated Heavy Duty Diagonal Cutting Tapered Nose Pliers: These Insulated Diagonal-Cutting pliers have dual layered grips that are flame retardant, impact resistant, and rated for 1000-volts. One-Inch deep jaws easily reach into confined spaces. They feature a heavy-duty tapered nose design with induction hardened cutting knives for durability. They are made of forged steel and have a hot-riveted joint for smooth action and no handle wobble.

Insulated High Leverage Diagonal Cutting Pliers: These Insulated Diagonal-Cutting pliers feature two layers of insulation to protect against electric shock. Clearly marked with the official 1000V symbol, these pliers meet or exceed ASTM F1505-16 and IEC 60900:2018 standards for insulated tools. Available with tapered or angled nose, while heavy duty versions employ greater cutting ability. The high-leverage design provides 36-percent greater cutting power than any other plier designs.

K-D502-10-INS Insulated Pump Pliers: Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol. Two layers of insulation provide protection against electric shock. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool. Wide range of versatile jaw positions. Secure tongue and groove design for non-slip grip – even with heavy pressure. A flame retardant, impact-resistant, bright orange outer coating. Integral guards help prevent hand contact with conductive parts.

Insulated Cutters

K-1005-INS Insulated Crimping / Cutting Tool: Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol. A flame retardant, impact-resistant, bright orange outer coating. Wire cutter in nose that is tapered for working in confined spaces. Induction hardened cutting knives for long life. Hot-riveted joint for smooth action and no handle wobble. Forged steel for maximum durability. Integral guards help prevent hand contact with conductive parts. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.

Insulated Wire Stripper/Cutter: This compact, lightweight wire-stripping, cutting tool cuts, strips, loops and gauges solid wire. 3 different versions strip from 0.75-6mm² solid wire, the largest version will also cut 0.5-2.5mm² stranded wire. Spring-loaded action for self-opening, while the narrow nose fits into tight places. Hardened spring steel with precision-ground stripping holes for easy removal of insulation.

K-63050-INS Insulated High Leverage Cable Cutter: Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol. A flame retardant, impact-resistant, bright orange outer coating. High-leverage design for exceptional cutting ability. Cable-gripping shear-type jaws. Precision, one-hand shearing action perfect for working in confined spaces. NOT suitable for cutting steel or ACSR.

K-1571-INS Insulated Lineman Skinning Knife: The exclusive design features dual-layer insulation for safety. The high-dielectric white inner layer is bonded to the tool while the outer orange layer is flame retardant and serves as a visual warning if the tool has been compromised. The insulated handle is molded for comfort and also features marks on the back to help measure the stripping length of wire. The blade is made of stainless steel for durability and corrosion resistance.

Screwdrivers & Tool Kits

Insulated Screwdriver – Round Shank: 4 different lengths with Phillips tips #1, 2 or 3. 8 different Cabinet lengths with tips sizes ranging from 2.4-9.5mm. 2 different lengths with either square tip #1 or 2. Clearly marked with the official 1000-volt rating symbol, Klein insulated tools exceed IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock. Built to handle the tough jobs with ease.

K-33528 9 Piece Insulated Cushion Grip Screwdriver Set: This nine piece set features assorted Klein’s screwdrivers with three different tips. Each are individually tested to exceeed the IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock. The highly durable, black nylon case features a zipper enclosure, custom-fitted tool pockets as well as an extra pocket for storage of papers and other items. Made in the USA.

K-33525SC Utility Tool Kit with Roll-up Case: The Utility Insulated tool kit features a set of 13 essential professional tools the Lineman needs, including 4 x assorted pliers, 6 x screwdrivers, a cable cutter, pump pliers and a skinning knife.  The light, compact, soft roll-up carrying case provides protective storage with custom-fitted pockets for each tool. The padded, adjustable shoulder strap lets you throw this kit over your shoulder and go. Made in the USA.

K-33525 13 Piece Insulated Tool kit: This set of 13 professional, insulated tools includes 4 x assorted pliers, 6 x screwdrivers, a cable cutter, pump pliers and a skinning knife. Two layers of insulation provide protection against electric shock. Custom case includes 2 pallets with custom-made pockets for each tool, piano-hinged case cover has both combination lock and two key-locked latches for security and storage space behind pallets for important papers or accessories. Meets or exceeds IEC 60900: 2012, ASTM F1505-10 standards for insulated tools.

K-33527 General Purpose Insulated 22 Piece Tool Kit: This 22-piece tool kit includes the must-have insulated tools professional electricians need. The high-leverage design of the 8 x assorted side-cutting and diagonal-cutting pliers provides more cutting power while the pivot joint is hot-riveted for smooth action and no wobble. The Cushion-Grip on the 9 x round-shank screwdrivers provide greater torque and comfort. The 1 x each wire stripper/cutting tools, pump pliers and skinning knife provide excellent choices for any job. The custom case includes 3 pallets with custom-fitted pockets for each tool, piano-hinged cover has both a combination lock and two key-locked latches for security, storage space behind the pallets to keep important papers and accessory items. Made in the USA.

K-33526 Basic 8 Piece Insulated Tool Kit: This 8 piece set features an assortment of popular compact insulated tools, including 3 x pliers, 3 x screwdrivers a cable cutter and wire stripper/cutter. Each are individually tested to exceed the IEC 60900 and ASTM F1505 standards for insulated tools. The highly durable, black nylon case features a zipper closure, custom-fitted tool pockets plus an extra pocket for storage of papers and other items. Made in the USA.

K-33529 Premium 8 Piece Insulated Tool Kit: Contains the same as the basic kit but with heavy duty long nose pliers and side cutting pliers.

Klein Tools Range of Cable Cutters

Klein Tools Range of Cable Cutters

CBS now stock a range of wide range of Klein Tools, including a variety of cable cutters. Established in 1857, Klein have always prided themselves on providing a wide range of high-power and high-performing tools, ideally suited to the needs of their now worldwide customer base. So, whether you need a cable cutter for telecommunications or for power industry work, Klein are bound to have the right tool for the job.

Ratcheting Cable Cutters

K-63060 Ratchet Cable Cutter, 260mm long: Quick action ratchet cutter for cutting copper wire up to 18mm and aluminum wire up to 22mm. This cutter features a hold-open spring that allows for rapid cutting while the quick-release lever permits the blade to open as the tool is being used. Hardened steel blades for lasting strength and sharpness. NOT suitable for cutting steel or ACSR.

K-63607 Ratchet Cable Cutter ACSR: Ratchet-action design of this ACSR Cutter provides maximum leverage with minimum effort. Forged, heat-treated, shear-type blades cut copper, aluminum and ACSR. Long steel handles have heavy vinyl grips for comfort and slip-resistance. Patented two-step ratchet mechanism requires fewer strokes per cut. Selectively-hardened blades and reduced hand force make it easier to cut ACSR up to 170mm², Copper up to 185mm² and Aluminium up to 300mm².

K-63750 Ratchet Cable Cutter, 308mm long: The high-leverage ratcheting mechanism allows for single handed cutting of larger diameter copper and aluminium cables up to 28mm. Hardened steel blades for lasting strength and sharpeness. Quick release lever opens blades easily in every position. NOT suitable for cutting steel or ACSR.

K-63711 Open Jaw Ratchet Cable Cutter: This ratcheting cable cutter is specifically designed to work in confined spaces. The high-leverage ratcheting mechanism allows for single handed cutting of copper up to 20mm and aluminium up to 25mm. Hardened steel blades for lasting strength and sharpness. Quick release lever opens the blades easliy in every position. NOT suitable for cutting steel or ACSR.

K-63800ACSR Ratchet Cable Cutter: These ACSR Racheting Cable Cutters are equipped to cut ACSR up to 22mm, copper up to 25mm, aluminium up to 31mm and guy wire up to 12mm. They have high-leverage ratcheting mechanisms for easier cutting, and can be locked when not in use. Plastic covered handles with hand guards for comfort and grip.

K-63700 Heavy Duty Ratchet Cable Cutter: Ratchet-action design of this heavy-duty Ratcheting Cutter provides maximum leverage with minimum effort. Forged, heat-treated, shear-type blades cut steel and ACSR up to 31mm diameter. 24″ long steel handles have heavy vinyl grips for comfort and slip-resistance. Blade-advance knob quickly rotates the blade to engage the cable or other material being cut.

Cable Cutters

K-63050 High Leverage Cable Cutter: The Klein Tools high-leverage cable cutter cuts aluminum, copper and communications cable. Cable-gripping shear-type jaws and a high-leverage design provide exceptional cutting capability. Through-hardened, not case-hardened, cutting surfaces are longer-lasting. NOT suitable for cutting steel or ACSR.

K-63041TH 25″ Standard Cable Cutter: Klein Tools Standard Cable Cutters are lightweight, yet efficient. They feature replaceable hook-jaw blades that grab and hold cable while the shear-cutting action makes clean cuts. Cuts soft cable up to 35mm, copper up to 240mm² and aluminium up to 300mm². The jaws are made of forged tool steel with a black-oxide finish for long life. The exceptionally strong fiberglass handles have heavy vinyl grips for added comfort and slip resistance.

K-63045 32″ Standard Cable Cutter: Cuts soft cable up to 44mm diameter, 500mm² copper and 600mm² aluminium. They feature replaceable hook-jaw blades that grab and hold cable while the shear-cutting action makes clean cuts. The jaws are made of forged tool steel with a black-oxide finish for long life. The exceptionally strong fiberglass handles have heavy vinyl grips for added comfort and slip resistance.

Bolt Cutters

Steel Handle Bolt Cutters: All-purpose, center-cut jaws for soft, medium, and hard metals. Forged, alloy tool steel jaws are precision ground for sure, efficient cutting and long life. The red steel handles have heavy vinyl grips with flat grips ends for 90-degree cuts. Available in 14, 18, 24 or 36″.

Standard Fibreglass Handle Bolt Cutters: All-purpose, center-cut jaws for soft and medium material up to 14mm, and hard metals up to 11mm. Forged, alloy tool steel jaws are precision ground for sure, efficient cutting and long life. Lockplate reinforcement prevents jaw bolts from loosening or turning, keeps jaws in correct alignment. The red fiberglass handles have heavy vinyl grips with flat grips ends for 90-degree cuts.

C-825 Portable Hydraulic Winch

C-825 Portable Hydraulic Winch

C-825 Portable Hydraulic Winch

Ideal for overhead line work such as ABC conductors, re-conductoring work and bare conductors the C-825 Portable Overhead Line Winch is designed to break down into easy to handle modules to provide a fully portable winching system. The system comprises of a strong, lightweight pole mounting frame with securing chains to ensure minimal movement on the pole during use. The winch can be pole or ground mounted and provides a flexible system where access is restricted or ground disturbance is unwanted. The winch has a maximum output torque of 615Nm and average tension of 300kg.

Klein Tool Bags and Storage

Klein Tool Bags and Storage

Professionals depend on a variety of tools in order to get a day’s tasks done right. Lugging all these heavy tools, parts and materials is hard work in itself, but Klein Tools’ tool bags and pouches help professionals stay organised day in and day out, offering so many more storage solutions than other typical tool bags. Klein Tools’ product line offers various solutions perfect for each professional’s preferences when travelling between jobsites. In fact, Klein’s family of engineers, craftsman and workers are constantly collaborating to find new ways professionals can stay organised and prepared across all jobsites. Klein’s available designs offer all professionals the opportunity to find a tool bag that is just right for their day to day carrying needs.

Bigger is not always better, especially when small bits and pieces get lost at the bottom of larger tool bags. Built-in pockets can help, but individual zipper bags offer an even handier solution to keeping groups of smaller items organised. Klein’s range of zipper bags are specifically designed to assist as tradespeople search for the part they need, and their colored interior makes stored items stand out, offering the perfect addition to any tool shed or vehicle.

You might be surprised by what Klein’s tool bags can keep safe, including power and hand tools, small bits and pieces and personal items, there’s more than one simple solution to staying organised, so let Klein Tools’ various tool bags and pouches help you discover the best way to stay prepared for the day’s projects.

CBS Cable Pulling Stockings

CBS Cable Pulling Stockings

Pulling socks or stockings, are indispensable in many different cable pulling applications. Our range of light, general and heavy duty stockings are manufactured from high-tensile, galvanized steel wire that is evenly hand woven in a single, double or triple wire weave according to pulling tension requirements. Slipped over the outside of the cable, when tension is applied, the grip contracts applying the pulling force to the cable. We reverse weave our grips which create a loop at the end of the grip instead of being crimped or soldered together. The wire is then joined under the crimped head, thus creating a higher quality product that outlasts the competition.

CBS also produce a range of non-conductive stockings. Made from high strength parallel-stranded fibre with a polyethylene sheath, these are also non-corrosive and abrasive resistant, and prevent damage to other components during pulling operations.

 

Klein Tools New Vinyl Storage Line

Klein Tools New Vinyl Storage Line

Klein Tools (www.kleintools.com), for professionals since 1857, have introduced a new bright orange vinyl storage line, which includes two Vinyl Buckets, Aerial Aprons, which are perfect for carrying smaller items such nuts, bolts and drill bits, Lineman Duffel Bag, Nylon Equipment Bags and Lineman Backpack, ideal for transporting and carrying clothing and larger, heavier items. The product line’s increased visibility and protection from the elements enables line workers to stay focused on getting the job done right, not wasting time searching for their tools.