+44 1572 723 665 sales@cbsproducts.com

Compressed Air Cooler

The Compressor Aftercooler has been designed to cool compressed air and remove water droplets prior to entering a CBS Tornado Cable Blowing Machine. The cooler unit is mounted on a tubular steel frame and is complete with gel filled puncture proof wheels and transit handle for easy manoeuvrability.

An air driven motor impeller forces cooling air through the Compressor Aftercooler and reduces the temperature of the compressed air by approximately 10º centigrade. The air motor is driven by compressed air taken from the down stream side of the water separator and passes through a filter-regulator-lubricator assembly prior to entering the air motor.

The Compressor Aftercooler is fitted with cam action quick release air hose couplings for easy fitting to interconnection air hoses normally supplied by CBS Products with a Tornado Cable Blowing Machine.

Waste oil/water mixtures are collected in a frame mounted drain can for environmentally acceptable disposal.

The water separator protector bar doubles as a carry handle to assist with moving over soft terrain or loading into a vehicle

Specifications:

Length: 1135mm
Width: 640mm
Height: 1000mm
Weight: 74kg
Max Working Pressure: 12 Bar
Max Air Compressor Flow Rate:12M³/Min
Max Air Inlet Temperature:65° C
Max Air Outlet Temperature:50° C
Max Ambient Air Temperature:45° C
Air Hose Connections Type:1 1/2" Cam and groove quick couplings

Ordering Info

Product NoDescription
C-1227-01Trolley Mounted Aftercooler Unit including 15m Hose
C-1250-AS1015-1Air Hose CBM/COOLER c/w securing clips