Linesmans Milled Face Hammer

• One milled face for driving staples used in pole-line work and common, unhardened nails.
• Other face is smooth for driving heavier duty hardware.
• Rugged and well-balanced, with the weight to drive lag bolts.
• Forged, tempered-steel head is only 3-¾” (95mm) long for use in tight areas.

Product No: K-80936MF

Linesmans Milled Face Hammer

Specification

Length:                                       14” (356mm)

Weight:                                       2.5lb (1.1kg)

Head Weight:                            36oz (1021g)

Adjustable Wrench – Extra Capacity

• Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces.
• Forged heat-treated alloy steel for light weight maximum strength and long life.
• High polish chrome finish is rust resistant.
• Precision-machined jaws are individually chosen and assembled by hand for smooth operation.
• Contoured handles for comfortable use.
• Knurl turns smoothly for easy operation.
• Rail is ground for precision fit.

Product No: K-50712

Adjustable Wrench – 12ins Extra Capacity

Specification

Length:                                       311mm

Weight:                                       0.8kg

Jaw Capacity:                             38mm

7″ Demolition Screwdriver

• Engineered, manufactured and tested for prying and chiselling.
• Plated metal strike cap to protect handle from hammer blows.
• Heat treated metal shaft runs complete length of handle to strike cap to transfer metal strike force.
• Made in the USA.

Product No: K-6027DD

Demolition Driver 7in shank

Specification

Length:                                        314mm

Weight:                                        0.25kg

Shank Length:                            7” (178mm)

Tip Type:                                     Keystone

Tip Size:                                      5/16” (7.9mm)

Linemans Ratcheting Wrench

• Bolt-through design allows bolts to pass through the socket
• 3/4-Inch and 1-Inch x 1-1/8-Inch combination square socket for most common utility hardware
• Bright yellow socket for easy visibility
• Works on most common utility pole hardware, such as lag bolts, ”C” clamps and suspension bolts
• Made in the U.S.A

Product No: K-KT151T

Linemans Ratcheting Wrench

Specification

Length:                                        330mm

Weight:                                        1.0kg

Lockback Knife 2-5/8″ Aluminium Handle

• Sheepfoot blade is AUS 8 stainless-steel hardened to 58-59 Rc.
• Slim and comfortable silver anodized-aluminium handle for corrosion-resistance.
• Reversible thumb stud provides easy, one-handed opening.
• Includes removable pocket/belt clip for easy access.

Product No: K-44006

Lockback Knife

Specification

Overall Length:                         168.3mm

Closed Length:                          98.4mm

Blade Length:                            66.7mm

Weight:                                       37g

Blade Type:                                Sheepsfoot

Blade Material:                         AUS 8 Stainless Steel

Combination Knife and Scissors Sharpener

Product No: K-48036

Combinaton Knife and Scissirs Sharpener

Specification

Length:                                      101.6mm
Width:                                        57.2mm
Height:                                       19.1mm
Weight:                                      0.05kg

Sportsman Knife Drop Point

Product No: K-44037

Sportsman Knife Drop Point

Specification

Overall Length:                        22.2cm
Closed Length:                         12.7cm
Blade Length:                           8.6cm
Weight:                                      187g

Laser Distance Measurer 20m/65ft

• Meter provides measurements up to 20m/65ft in distance, at an accuracy of + or – 1.6mm.
• Quickly calculates area, length and volume with large, easy-to read buttons.
• Provides both metric and fractional (imperial) readings.
• Offers the option of one-touch, single-distance measurement and continuous measurement.
• Highly visible backlit display.
• Depth gauge stick flips out to measure from inside corners or channels.
• Memory stores last 20 measurements.
• Includes handy carrying pouch to keep unit safe when not in use.

Product No: K-93LDM65

Laser Distance Measurer 20m

Specification

Height:                                     114mm

Width:                                      51mm

Depth:                                      35mm

Weight:                                    145g

Range:                                     50.8mm to 19.8m

Type:                                        Laser Reflection

Accuracy:                                 +/- 1.6mm

Standard:                                 IP54

Display:                                    LCD

Batteries:                                 2 x AAA

CL360 Clamp Meter

• Open Fork Meter with automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
• Tester measures AC current via the clamp, and AC/DC voltage, resistance, and continuity via test leads
• Wide jaw for measuring current in cables up to 3/0 sizes; accommodates cables of diameter up to 0.58-Inch (14.7mm)
• Non-contact voltage tester integrated into the jaw
• Includes a carrying case, test leads and 2 x AAA batteries
• Jaw and Housing: CATIV 600V/CATIII 1000V; Electrical: CATIII 600V/CATII 1000V; Class 2, Double Insulation
• Backlit display for clear readings
• Powers off automatically after 15 minutes of non-use to conserve battery life
• Rugged Klein ”TOUGH METER” is built to withstand a 9.9-Foot (3m) drop
• Low battery indicator and easily accessible battery compartment
• Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations

Product No: K-CL360

CL360 Clamp Meter

Digital USB Meter

• 3 to 20V DC; Current: 0.05 to 3A (USB-A); 3 to 20V DC; Current: 0.05 to 5A (USB-C)
• Continuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated)
• Tests most common standard USB-A or USB-C ports, including Qualcomm Quick Charge® ports
• Store and recall up to 10 readings
• Voltage and current overload detection
• Hi-resolution LCD for clear visibility in environments with low ambient lighting
• Durable cables to allow easy access to hard-to-reach ports
• Rugged, pocket-sized, and light weight Klein industrial design stands up to jobsite demands
• Built to withstand a 6.6-Foot (2m) drop
• No batteries needed; powered by the USB port being tested

Product No: K-ET920

USB Digital Meter

5m Double Hook Magnetic Tape Measure

• Uncluttered, easy-to-read lines marked on blade
• Dual angle magnetic hooks attach to conduit and steel studs
• Heavy-duty nylon coating protects blade printing
• Retraction speed brake controls blade speed and protects fingers from touching blade
• Double sided printing features centimetres and inches
• Super-sized back clip holds securely to wide belts and extends deep into pockets
• Up to 3m stand-out
• U.S Patent Pending

Product No: K-86315

5m Double Hook Magnetic Tape Measure

Specification

Length:                         82.6mm

Width:                           50.8mm

Height:                          77.4mm

Weight:                         0.37kg

Tape Measure Holder with Tether Ring

• Elastic bottom and hook and loop closure ensure this holder will fit most 25 ft. and 30 ft. tape measures securely
• Includes D-ring on top for tethering
• Reinforced stitching to add strength

Product No: K-5195TT

Tape Measure Holder

Specification

Weight:                                     0.05kg

Belt Width:                               Up to 64mm

Magnetic Torpedo Level with Tether Ring

• Includes split ring to tether level while working at height
• Powerful Rare Earth magnets, up to 5X stronger than strip magnets, hold firmly to iron and steel surfaces
• Strong, extruded aluminium frame features a convenient built-in hang hole
• Top-read level window simplifies viewing in tight areas
• Handy V-grooved edge for pipe and conduit work
• Large, highly visible vials: plumb, level and 45 degree
• Tether not included

Product No: K-9319RETT

Magnetic Torpedo Level with Tether Ring

Specification

Length:                                     228.6mm

Weight:                                     0.05kg

Material:                                   Aluminium

4-in-1 Square Impact Socket

• Single-ended impact socket with hands free adjustment between socket sizes
• Two coaxial spring-loaded sockets in one tool
• Includes 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch square socket sizes plus a 7/16-Inch hex quick-change adapter
• Works on 1/2-Inch, 5/8-Inch and 3/4-Inch pole hardware
• 13/16-Inch diameter, 6-Inch (152 mm) long hollow shaft allows use on long threaded bolts
• Cross hole design to prevent unintentional separation of adapter and socket
• Replacement adapter is available (NRHDA4)
• Engineered for use with impact drivers

Product No: K-NRHD4

4-in-1 Sqaure Impact Socket

Specification

Length:                                     229mm

Weight:                                     1.03kg

Material:                                   Steel

2-in-1 Square Impact Socket, 6 Point

• Single-ended impact socket with hands free adjustment between socket sizes
• Two coaxial spring-loaded 3/4-Inch and 9/16-Inch hex sockets in one tool
• Deep socket with a 1/2-Inch drive works great for pole hardware installation and removal
• High-torque, 6-point design contacts flat sides of hex fasteners reducing round-off
• Cross hole design to prevent unintentional separation of adapter and socket
• Engineered for use with impact drivers
• Great for pole hardware installation and removal

Product No: K-66004

2-in-1 Sqaure Impact Socket

Specification

Length:                                     28mm

Weight:                                     227g

Material:                                   4140 Steel

Tool Tether

• Keep your tools close at hand when working at height.
• Maximum working capacity of 4.5 kg.
• Relaxed length of 812.8 mm.
• Stretched length of 1524 mm.

Product No: K-TT1

Tool Tether, 4.5kg Max

Triple Locking Tool Tether

• Keep your tools close at hand when working at height
• Maximum working capacity of 7 kg.
• Triple-locking carabiner for additional security
• Relaxed length of 813 mm
• Stretched length of 1295 mm

Product No: K-TT2

Tool Tether, 4.5kg Max

50FT Flex Steel Fish Tape

• Fish tapes are 1/8-Inch wide high strength spring steel which are stiff for long runs and great for heavy duty wire pulls
• Laser etched markings in 1-foot (0.3 m) increments allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out
• Polypropylene case and handle offer the maximum in impact resistance
• Full grip-style handle gives you a firm, steady grip as you pull tape from the case
• Raised fingergrips transfer 100-percent of the winding power from your hand and fingers
• Unique sloped handle optimizes hand position for quick hand-over-hand rewinds

Product No: K-56001

50FT Flex Steel Fish Tape

Telescopic Pole 5.4m

• Extends to 18-feet in 10 seconds
• Compact design easily stores 32-Inches retracted
• Quick and easy extension with friction-twist lock design stays locked in place and will not spin loose or collapse
• Lightweight resin with durable enamel protective finish slides easily over obstructions
• Large hook attachment pulls multiple wires easily
• Includes padded shoulder strap
• Platform supports additional attachments for extended use

Product No: K-SRS56036

Telescopic Pole 5.4m

1/2 Inch Ratcheting Construction Wrench

• Accepts 1/2-Inch square-drive hex socket
• Reversible ratchet
• Eliminates the need for carrying several fixed-size wrenches
• Forged from select alloy steel with continuous-taper handle for aligning bolt holes
• Industrial black finish for corrosion resistance

Product No: K-3238

1/2 Inch Ratcheting Construction Wrench

Adjustable Spud Wrench

• Versatile wrench fits nuts and bolts
• Convenient and handy size with a continuous-taper handle for alignment of bolt and rivet holes.
• Forged from select alloy steel.
• Handy lanyard hole.
• Eliminates the need for carrying several fixed-size wrenches.
• Precision-machined jaws are individually chosen and assembled by hand for smooth operation.
• Heat-treated for long life.
• Knurl turns smoothly for easy operation.

Specification

Broad Head Bull Pin

• Forged, heat-treated bull pin increases efficiency by providing a larger striking surface
• Angled head and smooth blending of radii increase strength and reduce the danger of chipping
• Head design also reduces chance of pin slipping from the hand when aligning holes
• Squared-off shoulders, below the head, have been forged to provide a surface for applying wrench to loosen wedged bull pins
• Long, even taper reduces binding and hang-up
• Heat-treated for strength and black oxide finish for rust resistance

Specification

Bull Pin with Tether Hole

• Tether hole to keep it connected
• Vertical slot keeps bull pin aligned when hanging
• Machined from quality alloy steel
• Heat-treated for strength Tether not included

Specification

US Heavy Erection Wrench with Tether Hole

• Cross-hole with no sharp edges for tethering
• Forged from select alloy steel to withstand high-leverage and heavy loads
• Catalogue number, bolt size and nominal opening size are stamped on every wrench for easy identification
• Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding
• Extra-large hub area works on larger diameter holes better than other wrenches
• American Bridge design
• Tether not included

Specification

L-Style Hex Allen Key Caddy Set, 9-Piece

• The L-style hex keys are organized in a convenient, durable caddy
• Caddy contains a unique locking feature and marked slots for each key
• Hex sizes from 1.5 mm to 10 mm
• Top-grade alloy steel
• Heat-treated and tempered for added strength and durability
• Rust and corrosion resistance surfaces
• Extra length for hard-to-reach applications
• Short side great for higher torque situations and low clearances

Product No: K-LMK10

9-Piece L-Style Hex Allen Key Set

L-Style Ball End Hex Key Caddy Set Metric, 9-Piece

• L-style hex keys in convenient caddy sets
• Includes 9 sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm
• Each set contains a unique locking feature and marked slots for each key
• Ball end works on angles up to 25-degrees
• Durable caddy keeps hex keys organised
• Top-grade alloy steel
• Heat-treated and tempered for added strength and durability
• Rust and corrosion resistance surfaces
• Extra length for hard-to-reach applications

Product No: K-BLMK10

9-Piece Ball End L-Style Hex Key Set Metric

Block and Tackle Kit

• Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load
• Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings
• Swivel hook Cat. No. 259
• Hooks fit under insulator and engage pin on cross arm
• 3/8-Inch (10 mm) diameter rope
• 25-Foot (7.62 m) rope length
• Maximum safe load is 750-pound (340 kg)
• These are NOT occupational protective hooks. NOT for human support

Product No: K-180230SSR

Block and Tackle Kit

Polypropylene Hand Line w Snap Hook

• Made of 5/16-Inch (8 mm) three-strand polypropylene rope spliced to eye of snap hook
• Line 75-feet (22.86 m) long
• Forged steel snap hook with eye at 90 degree to opening
• Maximum Safe Load, 250-pounds (113 kg)

Product No: K-1803-60

Polypropylene Hand Line w Snap Hook

Can Wrench

• Two tools in one saves space in your pouch
• One end opens telephone box fasteners, the other end tightens nuts on binding-post terminals
• The 7/16-Inch socket has a black finish and the 3/8-Inch socket has a silver finish
• Sockets are 1-1/4-Inch (32 mm) deep to fit over long binding posts and are thin-walled for easy access into tight areas
• Socket ends are color-coded for quick identification of socket sizes
• Hex-socket design enables using a wrench to obtain extra torque
• High-impact, break-resistant handle for long and dependable service
• Sockets are heat-treated, alloy steel

Product No: K-68005

Can Wrench

Fox Wedge, Stainless Steel, 4 inch

• Used for splitting mating surfaces and for packing machinery and structures before fixing
• Also used in the marine environment because of its corrosion-resistant properties
• Forged from stainless steel for greater hardness and non-magnetic properties
• Ground blade with fine edge for easy entry
• Correctly heat treated to best suit product application

Product No: K-7FWSS10025

Fox Wedge, Stainless Steel

Replacement Hole Cutter Pilot Bit

• Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch (5 mm) thick
• Split point pilot drill bit prevents bit walking
• Integrated flange prevents the operator from drilling beyond the sheet metal
• For use with Klein carbide hole cutter products

Product No: K-31874

Replacement Hole Cutter Pilot Bit

Carbide Hole Cutters

• Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch (5 mm) thick
• Split point pilot drill bit prevents bit walking
• Integrated flange prevents the operator from drilling beyond the sheet metal
• Uses replacement pilot bit 31874

Bi-Metal Hole Saw

• Cuts precise holes in drywall and ceiling tile
• Recommended for most major brands of 6-Inch (152 mm) recessed lighting fixtures
• For use in drywall, ceiling tile, steel, wood, plastic and stainless steel
• Heavy-duty steel construction
• Bores through 2x4s in a single pass
• Use with Klein Tools Arbor (Cat. No. 31906). Sold separately

Product No: K-31900

Bi-Metal Hole Saw

Tradesman Pro Hard Cooler

• Lunch box keeps cool up to 30 hours; main compartment has a 16.1 ltr, 18 can capacity
• Cooler supports up to 300 pounds (136.1 kg); not only does this carry lunch, it doubles as a handy place to sit
• Inside storage compartment, lid opens full 180-degrees to access and holds items like phone, medicine, keys, napkins, utensils, etc.
• Lid stays open at 90-degrees to allow uninterrupted access; no rust stainless steel hinged lid is recessed to accommodate 1 Liter water bottles
• Shoulder strap holds lid in place while carrying and easily converts to a handle
• Lock hasp fits #1 Master Lock® or equivalent (not included)

Product No: K-55600

Tradesman Pro Hard Cooler

Specification

Length:                                         305mm
Width:                                           412mm
Height:                                          305mm
Weight:                                         3.1kg
No of compartments:                2
Capacity:                                      16.1 ltr – 18 cans

Tradesman Pro Soft Lunch Cooler

• Lunch box stays cool for up to 12 hours
• Cooler is insulated with double-thick, leak-resistant anti-microbial liner
• Cooler made of 1680d ballistic weave for durability
• Fully-moulded bottom protects against the elements
• Separate upper ”doghouse” compartment keeps certain items from getting squashed
• Mesh side pockets for extra items
• Front zipper pocket holds keys, napkins, medicine, etc
• Shoulder strap and handle for easy carrying

Product No: K-55601

Tradesmn Pro Soft Lunch Cooler

Specification

Length:                                         241mm
Width:                                           305mm
Height:                                          330mm
Weight:                                         1.5kg
No of compartments:                4
Capacity:                                      11.4 ltr