Klein Tools Wire Pulling Grips
Klein Tools has been manufacturing grips for over 135 years combining strength and durability to create an extremely high-quality line of grips. With ease-of-use and reliability, Klein wire-pulling grips set the mark.
Grips for Standard Aluminium and Copper Conductors
Specification
| Product No | Cable Range mm | WLL kgf | Jaw Length mm | Weight kg |
|---|---|---|---|---|
| K-1656-20 | 5.08 - 10.16 | 1,150 | 101.6 | 1.36 |
| K-1656-30 | 7.87 - 13.46 | 1,160 | 120.7 | 1.7 |
| K-1656-40 | 13.46 - 18.80 | 2,400 | 139.7 | 3.4 |
| K-1656-50 | 18.80 - 21.84 | 2,400 | 139.7 | 3.4 |
| K-1656-60 | 21.84 - 24.60 | 2,400 | 139.7 | 3.4 |
The grip is placed over the conductor with a Hotline stick that when removed the latch on the grip closes stopping the grip disengaging from the conductor.
Grips for Extra High Strength Cable and Conductors
Specification
| Product No | Cable Range mm | WLL kgf | Jaw Length mm | Weight kg |
|---|---|---|---|---|
| K-1684-5 | 5.54 - 13.97 | 2,240 | 127 | 2.83 |
| K-1684-74* | 5.54 - 13.97 | 2,240 | 127 | 2.83 |
| K-1684-5C** | 4.06 - 13.97 | 2,240 | 127 | 2.83 |
| K-1613-40 | 3.05 - 9.40 | 1,150 | 106.4 | 1.3 |
** K-1684-5C has an aggressive jaw profile.
Chicago Grips
Bare Wire
- Lightweight, cost-effective grip.
- Designed for working with solid and stranded bare wire from 2 mm to 5.1 mm.
- Single ”V” groove jaw.
Product No: K-1613-30
Chicago Grip for Bare Wire
Specification
Jaw Length: 76mm
Weight: 0.7kg
WLL: 630kgf
Minimum Cable Capacity: 2mm
Maximum Cable Capacity: 5.1mm
High Strength Cables
- Used for Aircraft, EHS, Messenger, Guy Strand cables
- Designed for 0.75 to 1.0-Inch (19.05 to 25.4 mm) diameter cable sizes
- For larger conductors, see our grips with round inside-jaw contour
- Double ”V” grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
- Max Safe Load of 15,000 lbs (6803 kg)
- Locking handle keeps jaw open while grip is placed on cable with a hot stick
Product No: K-1628-18
Chicago Grip for High Strength Cables
Specification
Jaw Length: 184mm
Weight: 6.4kg
WLL: 6800kg
Minimum Cable Capacity: 19mm
Maximum Cable Capacity: 25mm
Aerial Bundle Conductor Clamps
Specification
| Product No | Conductor Range mm2 | WLL kgf | Weight kg |
|---|---|---|---|
| D-766 | 4 x 50 | 600 | 2.3 |
| 4 x 35 | |||
| 4 x 25 | |||
| 2 x 95 | |||
| 2 x 70 | |||
| 2 x 50 | |||
| 2 x 35 | |||
| D-768 | 4 x 95 | 800 | 4.7 |
| 4 x 70 | |||
| D-974 | 4 x 120 | 1000 | 7.95 |
Grips for Large Conductors
Specification
| Product No | Cable Range mm | WLL kgf | Weight kg |
|---|---|---|---|
| K-1628-16-P | 7.87 - 22.35 | 2,245 | 7.71 |
| K-1628-30 | 21.59 - 31.50 | 4,080 | 12.29 |
| K-1628-40 | 31.50 - 39.12 | 6,650 | 15.47 |
Havens Grips
Messenger and Guy Strand
- Designed for use when light, compact grip is desired and where conductor damage is not a factor.
- Gripping pressure of the knurled jaw is applied to 6.35 mm cable area.
- Latch on K-1604-20L helps hold cable in the jaw.
Specification
| Product No | Cable Range mm | WLL kgf | Weight kg |
|---|---|---|---|
| K-1604-10 | 1.52 - 6.35 | 720 | 1.8 |
| K-1604-20L | 3.18 - 12.70 | 1,820 | 0.95 |
Wire Rope
- Designed for use when light, compact grip is desired and where conductor damage is not a factor.
- Gripping pressure of the knurled jaw is applied to 6.35 mm cable area.
- Swing latch helps hold cable in the jaw.
Product No: K-1625-20
Havens Grip for wire rope
Specification
WLL: 2,700kgf
Cable Diameter: 7.11-19.05mm
Weight: 1.8kg
Parallel Jaw Grips
- Lightweight, compact grips pull an exceptionally wide range of cable sizes and types.
- Designed with a round inside-jaw contour for maximum contact to minimize conductor damage.
- Lower jaw is serrated to firmly grip insulated cables and conductors.
- Design includes a latch that prevents the grip from falling in case of jaw disengagement from the cable.
- Large-diameter eye accommodates large hooks on hoists, winches and tackle blocks.
Specification
| Product No | Cable Range mm | WLL kgf | Jaw Length mm | Weight kg |
|---|---|---|---|---|
| K-1685-20 | 3.98 - 22.22 | 1,600 | 63.5 | 1.4 |
| K-1685-31 | 15.87 - 31.75 | 1,380 | 114.3 | 2.3 |
- Lightweight, compact grips pull an exceptionally wide range of cable sizes and types.
- Designed with a round serrated jaw to firmly grip insulated cables and conductors.
- A large opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks.
Specification
| Product No | Cable Range mm | WLL kgf | Jaw Length mm | Weight kg |
|---|---|---|---|---|
| K-KT4500 | 4.57 - 15.20 | 1,200 | 102 | 1.7 |
| K-KT4600 | 7.62 - 20.30 | 2,970 | 127 | 3.2 |
| K-KT4650 | 4.06 - 13.97 | 1,980 | 114.3 | 2 |
| K-KT4800 | 17.78 - 31.75 | 2,940 | 130.2 | 4.1 |
Parallel Jaw Grip, HDPE-Coated Cable to 1.362″
- Securely pulls HDPE-coated cable commonly known as “tree wire”
- Innovative high-traction surface grips the cable without damaging the outer jacket
- Tough carbide grit technology withstands even the harshest jobsite conditions
- Pulls cable diameters 0.625 to 1.362 inches (15.875 to 34.595 mm)
- Spring-loaded for one-handed operation and easy placement on the conductor
- Common tree wire cable types include General Cable, Hendrix® aerial systems, Rite Lite BLL conductor and Southwire® S2 covered cable
- Hendrix® is a registered trademark of Marmon Utility, LLC
- Southwire® is a registered trademark of Southwire Company, LLC
Product No: K-171670
Parallel Jaw Grip HDPE Coated Cable
Specification
WLL: 1,200kg
Cable Diameter: 15.9 – 34.6mm
Jaw Length: 114.3mm
Weight: 2.31kg