+44 1572 723 665 sales@cbsproducts.com

Insulated Tools

Insulated High Leverage Side Cutting Pliers

 

  • Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • A flame retardant, impact-resistant, bright orange outer coating
  • High-leverage design provides 46% greater cutting and gripping power than other plier designs
  • Integral guards help prevent hand contact with conductive parts

Specification

Product NoNose TypeLengthJaw LengthJaw widthJaw ThicknessWeight
K-213-9NE-INSNew England9-5/8”
244.5mm
1-19/32”
40.5mm
1-5/16”
33.3mm
5/8”
15.9mm
0.59kg
K-2000-9NE-INS **New England9-5/8”
244.5mm
1-19/32”
40.5mm
1-5/16”
33.3mm
5/8”
15.9mm
0.6kg

**Heavy Duty – cuts ACSR, screws, nails and most hardened wire.

Insulated High Leverage Side Cutting Pliers – Connector Crimping

 

  • Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • A flame retardant, impact-resistant, bright orange outer coating
  • High-leverage design provides 46% greater cutting and gripping power than other plier designs
  • Crimping die behind hinge for superior leverage
  • Integral guards help prevent hand contact with conductive parts

Product No: K-2139NE-CR-INS

Insulated High Leverage Side Cutting Pliers – Connector Crimping

Specification

Length:                                      244.5mm
Jaw Length:                               40.5mm
Jaw Width:                                33.3mm
Weight:                                      0.59kg
Nose Type:                               New England

Insulated High Leverage Universal Side Cutting Pliers – Connector Crimping

 

  • Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • A flame retardant, impact-resistant, bright orange outer coating
  • Crimping die behind hinge for superior leverage crimping non-insulated connectors, lugs and terminals
  • Toothed pipe-grip for greater power
  • Integral guards help prevent hand contact with conductive parts

Product No: K-12098-INS

Insulated High Leverage Universal Side Cutting Pliers

Specification

Length:                                     225.4mm
Jaw Length:                              45.2mm
Jaw Width:                                26.2mm
Weight:                                     0.45kg
Nose Type:                              Universal

Insulated High Leverage Diagonal Cutting Pliers

 

  • Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • A flame retardant, impact-resistant, bright orange outer coating
  • High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting power than other plier designs
  • Integral guards help prevent hand contact with conductive parts

Specification

Product NoNose TypeLengthJaw LengthJaw widthJaw ThicknessWeight
K-228-8-INSTapered8-1/4”
209.6mm
13/16”
20.6mm
1-3/16”
30.2mm
7/16”
11.1mm
0.32kg
K-248-8-INSAngled8-1/4”
209.6mm
13/16”
20.6mm
1-3/16”
30.2mm
7/16”
11.1mm
0.32kg
K-2000-28-INS**Tapered8-1/4”
209.6mm
13/16”
20.6mm
1-3/16”
30.2mm
7/16”
11.1mm
0.32kg
K-2000-48-INS**Angled8-1/4”
209.6mm
13/16”
20.6mm
1-3/16”
30.2mm
7/16”
11.1mm
0.32kg

** Cuts ACSR, screws, nails and most hardened wire.

7″ Insulated Heavy Duty Diagonal Cutting Pliers – Tapered Nose

 

  • Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • A flame retardant, impact-resistant, bright orange outer coating
  • Heavy-duty tapered nose design
  • One-inch deep jaws easily reach into confined spaces
  • Integral guards help prevent hand contact with conductive parts

Product No: K-220-7-INS

Insulated Heavy Duty Diagonal Cutting Pliers, Tapered Nose

Specification

Length:                                     200mm
Jaw Length:                              25.4mm
Jaw Width:                                24.6mm
Weight:                                     0.32kg
Nose Type:                              Tapered

8″ Insulated Long Nose Pliers – Side Cutting

 

  • Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • A flame retardant, impact-resistant, bright orange outer coating
  • Integral guards help prevent hand contact with conductive parts

Specification

Product NoLengthJaw LengthJaw widthJaw ThicknessWeightExtras
K-203-8-INS8-7/8”
225.4mm
2-5/16”
58.7mm
1”
25.4mm
1/2”
12.7
0.32kgExtended Handles
K-203-8N-INS8-7/8”
225.4mm
2-5/16”
58.7mm
1”
25.4mm
1/2”
12.7
0.32kgExtended Handles.
Skinning hole for
No. 12 AWG Wire
K-203-6-INS6-7/8”
174.6mm
1-15/16”
49.2mm
11/16”
17.5mm
3/8”
9.5mm
0.14kgCurved Handles
K-203-7-INS7-3/8”
187.3mm
2-7/16”
61.9mm
11/16”
17.5mm
3/8”
9.5mm
0.14kgCurved Handles

Insulated Pump Pliers

 

  • Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • Wide range of versatile jaw positions
  • Secure tongue and groove design for non-slip grip – even with heavy pressure
  • A flame retardant, impact-resistant, bright orange outer coating
  • Integral guards help prevent hand contact with conductive parts

Product No: K-502-10-INS

Insulated Pump Pliers

Specification

Length:                                        260.4mm
Weight:                                        0.5kg
Max Jaw Capacity:                     44.5mm

Insulated Crimping/Cutting Tool

 

  • Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • A flame retardant, impact-resistant, bright orange outer coating
  • Tapered nose designed for working in confined spaces
  • Crimping dies marked for insulated and non-insulated solderless terminals and connectors
  • Accommodates wire from No. 10 to 22 AWG
  • Wire cutter in nose
  • Integral guards help prevent hand contact with conductive parts

Product No: K-1005-INS

Insulated Crimping / Cutting Tool

Specification

Length:                                      247.7mm
Weight:                                      0.45kg
Crimps:                                     10 – 22 AWG

Insulated High Leverage Cable Cutter

 

  • Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • A flame retardant, impact-resistant, bright orange outer coating
  • Integral guards help prevent hand contact with conductive parts
  • High-leverage design for exceptional cutting ability
  • Cable-gripping shear-type jaws
  • Precision, one-hand shearing action perfect for working in confined spaces
  • DO NOT use to cut steel or ACSR

Product No: K-63050-INS

Insulated High Leverage Cable Cutter

Specification

Length:                                            244.5mm
Weight:                                            0.45kg
Maximum Cable Capacity:           4/0 Aluminium, 2/0 Soft Copper, 100 pair 24 AWG Communications Cable

Insulated Wire Strippers/Cutters

 

  • Individually dielectrically tested
  • Gauges, cuts, strips, and loops wire
  • Spring-loaded for self-opening
  • Compact, lightweight wire-stripping, cutting tool
  • Narrow nose fits into tight places
  • Hardened spring steel with precision-ground stripping holes for easy removal of insulation

Specification

Product NoLengthStrips and CutsWeight
K-11045-INS7"
177.8mm
10, 12, 14, 16, 18 solid AWG (4.0mm2, 2.5mm2, 1.5mm2, 1.0mm2, 0.75mm2)4.35kg
K-11049-INS7"
177.8mm
8, 10, 12, 14, 16 Stranded AWG (6.0mm2, 4.0mm2, 2.5mm2, 1.5mm2, 1.0mm2)4.35kg
K-11055-INS8"
203.2mm
10, 12, 14, 16, 18 solid AWG (4.0mm2, 2.5mm2, 1.5mm2, 1.0mm2, 0.75mm2)
12, 14, 16, 18, 20 AWG Stranded (2.5mm2, 1.5mm2, 1.0mm2, 0.82mm2, 0.5mm2)
5.44kg

Insulated Screwdriver – Round Shank

 

  • 1000V Rated for safety
  • Durable, two-layer, moulded insulation to meet or exceed all ASTM and IEC standards for insulated tools
  • Cushion-Grip handle for greater torque and comfort
  • Custom US-made tool steel
  • Made in the USA

Specification

Product NoTip TypeTip SizeLengthShank LengthWeight
K-6334-INSPhillips#1196.9mm101.6mm60g
K-603-4-INSPhillips#2211.1mm101.6mm91g
K-6037-INSPhillips#2287.3mm177.8mm113g
K-6337-INSPhillips#3314.3mm177.8mm181g
K-607-3-INSCabinet2.4mm171.5mm76.2mm54g
K-612-4-INSCabinet3.2mm196.9mm101.6mm60g
K-601-4-INSCabinet4.8mm196.9mm101.6mm60g
K-601-7-INSCabinet4.8mm273.1mm177.8mm77g
K-602-4-INSCabinet6.4mm211.1mm101.6mm91g
K-605-7-INSCabinet6.4mm287.3mm177.8mm113g
K-602-7-INSCabinet7.9mm314.3mm177.8mm181g
K-602-8-INSCabinet9.4mm339.7mm203.2mm227g
K-661-4-INSSquare#1211.1mm101.6mm91g
K-661-7-INSSquare#1287.3mm177.8mm91g
K-662-4-INSSquare#2211.1mm101.6mm91g
K-662-7-INSSquare#2287.3mm177.8mm91g

2 Piece Insulated 4″ Screwdriver Set

 

  • Includes one 1/4” Cabinet-Tip (602-4-INS) and one #2 Phillips-Tip (603-4-INS)
  • Reduces risk with work up to 1000 volts
  • Durable, two-layer, moulded insulation
  • Orange outer coating is flame and impact resistant
  • White high-dielectric inner coating is bonded to the steel
  • Cushion-Grip handles for greater torque and comfort
  • Meets or exceeds IEC 60900 and ASTM F1505 standards for insulation
  • Made in the USA

Product No: K-33532-INS

2 Piece Insulated 4” Screwdriver Set – Round Shank

Insulated Linesman’s Skinning Knife

 

  • Clearly marked with the official 1000-volt rating symbol
  • Durable two-layer insulation
  • Klein’s exclusive design features moulded measuring marks on back of handle to help measure stripping length of wire
  • Large moulded handle for an easier, more comfortable grip
  • Tough, tempered steel blade provides maximum sharpness and durability to withstand frequent cable scoring
  • Meets or exceeds ASTM F1505-10, IEC 60900:2012, CAN/ULC-60900-09, NFPA-70E, 2012 ed. CSA Z462-08
  • VDE certified

Product No: K-1571-INS

Insulated Lineman’s Skinning Knife

Specification

Length:                              222.3mm
Weight:                              0.16kg