| |
Mini Barrier - 3 Sided Regular Selling Price is £200
per set
10 Sets Remaining at £23 (factory
direct) This barrier has boards finished one side in alternate red-white
retro-reflective material plus kicking rails in dayglo yellow. These barriers can be erected in seconds to guard temporary hazards.
| SPECIFICATION |
| |
|
|
|
|
| Open (each side) |
|
|
|
660 x 1020mm high |
| |
|
|
|
|
| Closed (overall) |
|
|
|
710 x 1020 x 60mm |
| |
|
|
|
|
| Weight |
|
|
|
9kg |
| |
|
|
|
|
|
|

| ORDERING DETAILS |
| ProductNo |
|
Description |
| A-569-8-3 |
|
Mini barrier CH8 - 3 sides |
| |
 |
 |
 |
|
| |
MACHINE RODDING MULTI PURPOSE (Sub-Duct Pusher)
Regular Selling Price is £1500
1 Remaining at £1200 (factory
direct)
General Description: The Machine Rodding Multi Purpose is designed
to install subduct, and assist in rodding operations. The unit is
mounted on a sturdy anti corrosion treated tubular steel frame, fitted
with pneumatic tyres. . The hydraulic controls are mounted on the
frame for ease of transportation. The unit is fitted with a tilting
extendable boom, and chamber clamp for use in underground structures.
The unit can install subduct and rod at the rate of 30m/min and is
CE approved.
Features spring loaded self centering fail safe operating lever
speed adjustment control load indicator gauge in “Bar” measuring
counter with reset lever front boom extending to 1 metre with angle
facility dropping into underground chamber extendable chamber clamp
for attaching to side walls. Range 400 – 800mm angle of operation
0-45º lifting eye scraper for cleaning during withdrawal on
rodding operation – 25mm dia locking device to retain Guide
Rod Flexible No. 5 split pusher body which lifts and rotates to allow
removal of subduct, or rod anti crush control to prevent damage to
subduct and cable automatic cutout when maximum pushing force is
reached cable clamping force 100 -150kgs disc spring controlled screw
clamp to engage drive belts onto subduct and cable cast aluminium
body mounted on sturdy, corrosion resistant wheeled tubular steel
frame, fitted with pneumatic tyres moulded profiled drive belts.
Length: 980mm
Width: 460mm
Height 760mm
Weight 53kg |
|
Features :
- spring loaded self centering fail safe operating lever
- speed adjustment control
- load indicator gauge in “Bar”
- measuring
counter with reset lever
- front boom extending to 1 metre with
angle facility dropping into underground chamber
- extendable chamber
clamp
for attaching to side walls. Range 400 – 800mm
- angle of operation
0-45º
- lifting eye
- scraper for cleaning during withdrawal on
rodding operation – 25mm dia
- locking device to retain Guide
Rod Flexible No. 5
- split pusher body which lifts and rotates
to allow removal of subduct, or rod
- anti crush control
to prevent damage to
subduct and cable
- automatic cutout when maximum pushing
force is reached
- cable clamping force 100 -150kgs
- disc spring
controlled screw
clamp to engage drive belts onto subduct and
cable
- cast aluminium
body
- mounted on sturdy, corrosion resistant
wheeled tubular steel frame, fitted with pneumatic tyres
- moulded
profiled drive
belts.
|
| |
Breeze Cable Drum Cradle
Regular Selling Price is £500
2 Remaining at £400 (factory
direct)
The Drum Cradle has been designed to lift 2 x 1200
mm maximum diameter of micro duct with a total weight of 200kg. The
Drum Cradle is a rigid tubular steel construction with a detachable
drum spindle and drum spacer, the drum spacer prevents the drums
from rotating against each other. The drum shaft is locked in position
by a sprung loaded plunger that can be fixed to allow removal of
the drum spindle.
When the drums are loaded into the frame the handle can be swung
over such that the ground frame is upper most and used to move the
drums around the site.
| SPECIFICATION |
| |
|
| Max Drum Weight |
200kg |
| Max Drum Diameter |
1200mm |
| Max Drum Width |
850mm |
| Min Drum Bore |
63mm |
| Height: |
790mm |
| Width: |
1200mm |
| Length: |
1110mm |
Weight:
|
32kg |
|
|

| ORDERING DETAILS |
| ProductNo |
|
Description |
| C-1325 |
|
Cable Drum Cradle |
 |
 |
 |
|
| |
Hydraulic Drum Jacks
Regular Selling Price is £1009/pair
Priced to sell at £800 (factory
direct)
Lightweight hydraulic drum jacks, which are almost indispensable
for use in the cable yard. Versatile and easily and easily adjustable
within seconds to accommodate a vast range of drums. Excellent all-round
stability, fitted with wheels to be easily moved by one person.
| SPECIFICATION |
| |
|
|
|
|
| Capacity/Pair |
|
|
|
6 Tonne |
| |
|
|
|
|
| Min Drum Dia: |
|
|
|
880mm |
| Max Drum Dia: |
|
|
|
3000mm |
| Weight per pair: |
|
|
|
118kg |
| Spindle Weight: |
|
|
|
53kg |
|
|

| ORDERING DETAILS |
| ProductNo |
|
Description |
| D-536-01-F |
|
Hydraulic Drum Jack – 6 Ton |
| |
 |
 |
 |
|