CBS Products Telecom Cable Installation Equipment

•

	Telecom Cable Installation Equipment
	AccelAir • Breeze • Tornado • Tube Blowing • Winches • Accessories
	Search for Product by P/N or Common Name
	CBS Mini Cable Installers course
	This course will include the operation of all our blowing equipment including the AccelAir, Breeze and Tornado. Also inlcluded: Prepare different tube bundles and identification of primary tubes Handle deploy and test tube bundles Apply health and safety procedures Understand the importance of tensile and thermal tube assembly relaxation Operate Breeze blowing equipment including the fleeting machine Understand and apply blowing techniques including point to point blows, centre blowing and series blowing Maintain the blowing equipment and change out machine parts to accommodate differing mini cable sizes Please go to http://www.cable-training.co.uk/corCourseInfo.asp?courseId=72 for more information and registration. This course is presented by Cable Telecommunications Training Services Ltd., the UK's Leading Telecommunications Information Communications Technology Training Provider

	AccelAir
			CBS AccelAir Blow Fiber Machine The AccelAir Blown Fiber Machine is the latest complement to the range of fiber optic blowing equipment available from CBS. Designed to suit the smaller end of fiber range from 2 to 12 fibers (1 to 2mm dia.) Product Code: C-1400 < More Info>

	Breeze
			CBS BREEZE Cable Blowing Machine The “BREEZE” Cable Blowing Machine has been designed to meet the growing need for the installation of micro cables. Small and portable with ergonomic controls, it is ideally suited for external or internal use. Product Code: C-1300 < More Info>

			CBS Breeze Configuration for Cable Blowing In order to customise your new “Breeze” to your application, we ask that you pick the Tube Collet Assembly, the Cable Guide Assembly and the Cable Collet Assembly. Product Code: Various < More Info>

			CBS Cable Blowing Compressor M17 Compressor specifically for use with Breeze Cable Blowing Machine having 15 bar pressure with 1000 litres/m (35.3cfm) flow. Product Code: C-M17-15 < More Info>

			CBS Breeze Cable Drum Stand The Drum Stand has been designed in sections for ease of transportation and simply slots together to form a rigid and stable drum stand. Product Code: D-1156 < More Info>

			CBS Breeze Cable Drum Cradle The Drum Cradle has been designed to lift 2 x 1200 mm maximum diameter of micro duct with a total weight of 200kg. Product Code: C-1325 < More Info>

			CBS Micro Cable Fleeting Device The Micro Cable Fleeting device has been developed to enable longer lengths of fibre optical cable to be laid from a single drum. Product Code: C-1315 <More Info>

			CBS MicroGlide Lubricant CBS Micro Glide is a water-based preparation of a blend of polymers. It is easily applied and exhibits excellent coverage. Product Code: C-1313 < More Info>

	Tornado
			CBS Tornado Plus Cable Blowing Machine The cable blowing machine, comprising an air box and cable pusher, has been designed to provide an effective and safe method of fibre optic cable installation. The system installs fibre optic cable of 6mm (0.25”) to 32mm (1.25”) overall diameter, at speeds up to 90m/min (300ft / min), into pre-installed ducts. Product Code: Tornado <More Info>

			CBS Tornado Configuration for Cable Blowing In order to customise your new “Tornado” to your application, we ask that you pick the various collets and seals corrisponding to your application. Product Code: Various < More Info>

			CBS Hydraulic Power Pack A lightweight, trolley mounted, hydraulic power pack, with pre-set internal system protection relief valve and quick release connectors. Product Code: C-1200 < More Info>

			Compressors All compressors are fitted with air coolers, condensation separator and air filtration and come mounted on a two-wheel trailer Product Code: various <More Info>

			CBS Compressed Air Cooler Ideally the compressed air entering the Cable Blowing Machine should be cool and moisture free to optimise the cable blowing process. This is achieved by a Compressed Air Cooler. Product Code: C-1226 <More Info>

			CBS Cable Fleeter The Fleeter replaces the manual method of “figure of eighting” cable, and provides protection and security for the cable. Product Code: C-1265 <More Info>

			Pressurisation Kit The CBS Duct Pressurisation Kit has been designed to test the integrity of the duct by checking that the duct has no leaks. This will confirm that the duct holds air pressure, prior to cable blowing. Product Code: C-1262 < More Info>

			Duct Checking Equipment Direct buried ducts can suffer from compaction, reduction or other obstructions, therefore, before cable installation begins, CBS recommends that each length of duct is checked for continuity and freedom from obstruction. Product Code: C-RD-CAT-F < More Info>

			Plastic Duct Cutter Quick and easy to use the adjustable die cast circumferential cutter provides a clean cut of plastic ducts Product Code: D-291 < More Info>

			Plastic Duct Slitter Tool for longitudinal cutting of duct, and removal of spare duct from installed cable Product Code: D-290 < More Info>

			Universalube Universalube is a water-based preparation based on wax and silicone polymers. It is easily applied and exhibits excellent coverage. Product Code: C-LUBE < More Info>

			Cable Overblowing Junction Box The CBS Cable Overblowing Junction Box has been designed to install a new cable or duct-tubes into an existing occupied sub-duct (subject to space being available). Lighter in weight than our 'J' Junction Box, this is the box you'll want if you constantly use the same size duct. Product Code: C-1253 < More Info>

			CBS ‘J’ Junction Box with interchangeable collets The CBS Cable Overblowing Junction Box has been designed to install a new cable into an existing occupied sub-duct (subject to space being available). Or alternatively used for blowing micro tubes over previously installed cable. Adaptable to many different size cable ducts. Product Code: C-1254 < More Info>

	Tube Blowing
			Tornado Tube Blowing Machine The tube-blowing machine, comprising an air box and pusher, has been designed to provide an effective and safe method of installing Micro-tubes. Product Code: Tornado Tube Blowing Machine <More Info>

			Tube Blowing Kit Tornado Tube Blowing Kit includes the following: Tube Blowing Machine C-1200 Hydraulic Power Pack including 2x7m hoses 1 off – Tube Kit, 1 off – Sub Duct Clamp Collet, 1 off – Sub Duct Seal Collet Product Code: various <More Info>

			CBS Hydraulic Power Pack A lightweight, trolley mounted, hydraulic power pack, with pre-set internal system protection relief valve and quick release connectors. Product Code: C-1200 < More Info>

			Tube Blowing Accessories CBS has developed a micro tube pressuring system, which prevent potential problems where the blowing air can collapse the tubes. The system charges the tubes on their drums; this keeps the micro tubes stiff and resilient during the tube installation procedure. Product Code: Various < More Info>

			Tube Blowing Conversion Kits The tube blowing conversion kits are initially used to convert an existing Tornado Cable Blowing Machine into a Tube Blowing Machine for installing micro tubes into ducts. Product Code: various <More Info>

	Winches
			Lightweight Capstan Winch The C-1035 Lightweight Capstan Winch is designed for use over manholes Product Code: C-1035 <More Info>

			Pull and Assist Winch The C-1045 winch has been designed to meet the requirements of installing telecommunication cables Product Code: C-1045 <More Info>

	Accessories
			Duct Entry Rollers and Cable Duct Protection Duct Entry Rollers are designed to allow rope or cable into and out of the duct mouth. They are available for different sizes of duct ranging from 25mm – 100mm Product Code: Various < More Info>

			Triple Corner Rollers Used in pairs Triple Corner Rollers are used on bends in open trench work. Product Code:D-1047-001 <More Info>