Cable Blowing Machines
Tornado Plus Cable Blowing Machine
The cable blowing machine, comprising an air box and cable pusher, has been designed to provide an effective and safe method of fibre optic cable installation. The system installs fibre optic cable of 6mm (0.25”) to 32mm (1.25”) overall diameter, at speeds up to 90m/min (300ft / min), into pre-installed ducts.
Product Code: C-1250-08
JetStream Cable Blowing Machine
The C-1900 has been designed to provide maximum cable protection, combined with the performance and reliability of hydraulic drive. The profiled double drive belt system is driven by single 32cc hydraulic motor. Designed to install cable sizes of 4-20mm into duct diameters of 12-50mm.
Product Code: C-1900
Hurricane Cable Blowing Machine
The C-1750 Hurricane has been designed to maximise protection for micro cables with a compliant double drive concept, backed by the latest technology in servo controls to provide precise control of torque and speed. Single person operation with safe, easy to operate ergonomic controls combines with low maintenance and high reliability to form the machine’s key features. The Hurricane is adjustable to suit a wide range of cable diameters 2.5-14mm.
Product Code: C-1750
AirStream Cable Blowing Machine
The C-1700 AirStream cable blowing machine has been designed to maximise protection for micro cables with a compliant double drive concept, backed by the latest technology in servo controls to provide precise control of torque and speed. Designed to install cable sizes of 2.5-11mm into tube sizes of 5-18mm.
Product Code: C-1700
Pneumatic AirStream Cable Blowing Machine
The C-1700-PNEU Pneumatic AirStream has been designed to be a robust and simple to operate cable blowing machine. The compliant double drive concept also provides the maximum protection for micro cables. Designed to install cable sizes of 2.5-11mm into tube sizes of 5-18mm.
Product Code: C-1700-PNEU
Accelair 2 Fibre Blowing Machine
The C-1800 Accelair 2 Fibre Blowing Machine has been developed to provide a simple to use and reliable fibre blowing solution. It is designed to install a fibre range from 1 to 3mm diameter into tube sizes of 3-10mm, thereby providing the complete range of blown fibre installation solutions from one machine.
Product Code: C-1800
Whisper Cable Blowing Machine
The Whisper Cable Blowing Machine has been designed to provide a compact and portable cable installation system. Easy component changes allow for the installation of different cable sizes into pre-installed microducts. Cable drive comes from most types of cordless drill (not included) and an electronic display provides readouts of cable installation speed and distance. Designed to install cable sizes of 2-8.5mm into microduct sizes of 5-18mm.
Product Code: G-GMP-89910
GentL Air Fibre Blowing Machine
The GentL Air is a portable and affordable solution for pushing fibre in micro ducts using a battery operated drill and compressed air. It has been designed to install fibre sizes of 1-3mm into duct sizes of 4-7mm, with an adjustable clutch for cable protection.
Product Code: G-GMP-89916
Tornado Tube Blowing Machine
The tube-blowing machine, comprising an air box and pusher, has been designed to provide an effective and safe method of installing Micro-tubes. The system operates on the viscous drag principle employing compressed air to install the tubes, controlled and assisted by a belt drive system.
Blowing Machine Compressors
Large Cable Blowing Compressors
All compressors are fitted with air coolers, condensation separator and air filtration and come mounted on a two-wheel trailer.
Compressor for Pneumatic Airstream
The C20-14 compressor has been specifically selected for use with the C-1700-PNEU pneumatic AirStream cable blowing machine.
Cable Blowing Compressor
This Compressor is specifically for use with the AirStream and Breeze Cable Blowing Machine having 15 bar pressure with 1000 litres/m (35.3cfm) flow.
C-1045 Pull and Assist Winch
The C-1045 winch has been designed to meet the requirements of installing telecommunication cables, employing a 813mm diameter single capstan to impact a controlled force to the pulling rope or cable. The single capstan allows the winch to be placed at the mid point of a section to assist in the pull, thus enabling longer pulls to be achieved.
Product Code: C-1045-001-R4
The Fleeter replaces the manual method of “figure of eighting” cable, and provides protection and security for the cable.
Product Code: C-1265-20-01-R5
Mini Cable Fleeting Device
The Mini Cable Fleeting device has been developed to enable longer lengths of fibre optical cable to be laid from a single drum.
Product Code: C-1315-20-11