Tube Blowing Conversion Kits
The tube blowing conversion kits are initially used to convert an existing Tornado Cable Blowing Machine into a Tube Blowing Machine for installing micro tubes into ducts. If additional Tube Bundle Configurations were required, additional Tube Kits would be needed.
Each Conversion Kit Contains:-
2 off – Hydraulic Motors
2 off – Drive Chassis (upper & lower)
1 off – Tube Guide Collet
1 off – Tube Guide & Screws
1 off – Venturi Collet
Ordering Info
Product No | Description |
---|---|
C-1250-CON-2x12 | 2 x 12mm |
C-1250-CON-3x12 | 3 x 12mm |
C-1250-CON-4x12 | 4 x 12mm |
C-1250-CON-6x12 | 6 x 12mm |
C-1250-CON-7x10 | 7 x 10mm |
C-1250-CON-5x10 | 5 x 10mm |
C-1250-CON-4x10 | 4 x 10mm |
C-1250-CON-3x10 | 3 x 10mm |
C-1250-CON-2x10 | 2 x 10mm |
C-1250-CON-10x7 | 10 x 7mm |
C-1250-CON-7x7 | 7 x 7mm |
C-1250-CON-6x7 | 6 x 7mm |
Other Tube Bundle Configurations available on request (please consult CBS)