UB20 Industrial/Confined Space Blower- Exhauster                        Printable Ver
Ramfan combines high performance turbofan design with high strength polymers to create a line of rugged, protable turbo blowers. The line is ideal for general use, confined space, hazardous
ventilation and delivers the highest airflow in their class. The double-wall, polyethylene case is lightweight, corrosion and chemical resistant and handles the bumps and falls of any jobsite.

• Powerful, compact size and lightweight.
  High pressure axial blower with 9 blade
  impeller.
• Corrosion proof, dent resistant and virtually indestructible.
• Double-walled UV resistant polyethylene
  house.
• Ultra quiet operation.
• Thermal switch provides overheat
  protection.
• AC-4.6m cord c/w power switch, IP65 rain
  tested switch enclosure.
• DC-4.6m cord c/w battery clips.

UB20 Battery Pack & Charger  Printable Ver
The long life battery pack features high-low
control. Pulse width modulation extends the
battery up to 10 hours in the low setting, yet gives a full 2.5 hours on high. Can be used with vehicle battery with optional connector. Built-in charger allows you to full recharge the battery in 12 hours.

Purge the area on high for 10 minutes, then switch to low speed (low noise as well) and maintain fresh air for the whole work shift. Ideal for construction job sites to eliminate noisy petrol powered blowers.

• High-low control enables fast-purge
  ventilation and lower speed for maintaining
  safe work space.
• High impact case includes battery and built in charger for overnight charging.
• Up to 10 hours of continuous operation.
• Lightweight and portable.

UB20 In-Line Heating System   Printable Ver
The in-line heating system with its propane-fired
heat exchanger provides safe, warm breathing air in cold conditions.

• For tent/shelter or confined space heating.
• Remote thermostat included.
• Up to 10 hours continuous operation with
  standard propane gas cylinder.
• Heater attaches quickly and easily to UB20
  blower.
• Output: 70,000 BTUs / 13.5kW.
• Includes propane regulator and connection
  assembly.
• Easy access top-mounted heater control
  panel.
• Compatible with UB20 MED system.
• IP20 rated enclosure.

Comprising of three components, the MED,
Swivelling elbow and universal mount, the MED
system increases safety by maintaining continuous airflow.

• Ventilate without blocking entry.
• Maintain airflow while working.
• UB line compatible.
• Anti-static housing.
  

Each system includes 20cm Blower/Exhauster,
Quick couple canister with 4.6m or 7.6m duct, MED, 90 degree elbow and universal mount.

Mister                                    Printable Ver

• Misting Collar mounts easily to a UB20
  blower.
• Garden hose connection used 2.1gph of
  water for cooling mist injected into airflow.
• Cools airflow up to 25 degrees.

UB20 High Pressure Cool-Pak

• High Pressure Cool-Pak produces 400psi
  pressure for drier, micro-fine mist of water
  injected into UB20 airflow.
• Operated on 120v/60Hz with GFCI
  protection.
• Connects quickly and easily to UB20 Blower.