CBS Products Underground Cable Laying Equipment

•

	Underground Cable Laying Equipment
	Winches • Cable Laying Rollers
	Search for Product by P/N or Common Name
	Winches
			Lightweight Capstan Winch The C-1035 Lightweight Capstan Winch is designed for use over manholes Product Code: C-1035 <More Info>

			CBS C-990 1 & 2 Tonne Hydraulic Winch The CBS C-990 Winch has been designed to provide the very best in hauling equipment. Product Code: C-990 <More Info>

			CBS C-990 3, 4 & 5 Tonne Hydraulic Winch The CBS C-990 Winch has been designed to provide the very best in hauling equipment. Product Code: C-990 <More Info>

			C-1350 Cable Pusher The C-1350 Cable Pusher has been designed to assist the laying of electrical cables or cylindrical elements. Product Code: C-1350 <More Info>

	Cable Laying Rollers
			Trench Roller Designed for use on soft earth or in trench work. Robust die cast aluminium roller mounted on oil pregnated bearings. Product Code: D-197 < More Info>

			Twin Link Corner Roller Used for general purpose cable protection, where bends or other hazards arise. Product Code: D-438 <More Info>

			Vertical Link Roller Can be assembled to CBS D-438 above to accommodate trench bends. Product Code: D-437 <More Info>

			Hoop Roller (Aluminium Roller) A cable roller designed to bridge existing cables. Fitted with oil-impregnated bearings for use in adverse site conditions. Product Code: D-196 <More Info>

			“V” Frame Guide Set Positioned in front of drum to guide cable into trench or duct. Product Code: D-194 < More Info>

			Trench Feed Roller Set Guides cables into trench, adjustable vertical guide rollers. Product Code: D-195 < More Info>

			Lead Roller A horizontal roller to protect cable feeding from drum, fitted with end guides Product Code: D-439 < More Info>

			Cable Roller – Steel Sheave This roller is designed for use in trenches, on pavements or across steel gantries in factories. Product Code: D-193 <More Info>

			Triple Corner Rollers Used in pairs Triple Corner Rollers are used on bends in open trench work. Product Code:D-1047-001 <More Info>

			Manhole Quadrant Roller Three cast aluminium rollers mounted in a tubular steel frame, allows cable to gradually turn through 90° into manhole opening. The effective rolling radius is 800mm. Product Code: D-1048-001 < More Info>

			Manhole Entry Roller This roller is used to guide draw rope into and out of manhole openings. Product Code: D-1041-001 < More Info>

			Duct Entry Rollers and Cable Duct Protection Duct Entry Rollers are designed to allow rope or cable into and out of the duct mouth. They are available for different sizes of duct ranging from 25mm – 100mm Product Code: Various < More Info>

			Cable Duct Protection Fits into cable duct entries to protect cable sheath from damage Product Code: Various < More Info>