+44 1572 723 665 sales@cbsproducts.com

W1-TEW25H-0099 Tower Erection Winch

(Extra Rope Capacity)

This winch has been designed to comply with all relevant safety requirements for lifting loads. Two fully automatic, fail – safe-braking systems are incorporated into the unit. The first is situated directly in the transmission line and functions every time the winch controls are operated. The second is mounted in direct contact with the rope drum and is controlled by sensing system acting on the main drive chain and the hydraulic oil pressure. In the unlikely event that the chain should fail, or all hydraulic pressure is lost, then this second brake would automatically apply and hold the load. This brake can also be applied manually. All components used in the manufacture of this winch are designed to offer 5:1 safety factor based on the safe working load of this winch.

Specifications:

 

Winching Capacities:
The winching capacity is dependent upon the quantity of rope left on the rope drum. As a guide the following will apply:
Rope Drum Full1000kg
Rope Drum Half Full2000kg
Rope Drum Empty3000kg
The actual safe working loads will depend upon the manner of which the winch is working and upon the strength of the wire rope. As a guide, the above winch capacities assume a factor safety of 3:1, for lifting use a safety factor of at least 5:1 and for man riding applications, use a safety factor of at least 10:1.
Rope Capacity:
750 metres of 13mm diameter
500 metres of 16mm diameter
300 metres of 20mm diameter
Rope Speeds:
Once again, the rope speed is dependent upon the amount of rope on the rope drum. The speed is infinitely variable throughout the full range using the simple FAST-SLOW control pump.
Rope Drum Full35 metres/min
Rope Drum half full 25 metres/min
Rope Drum empty 15 metres/min
Dimensions and Weight
Length2700mm
Width1670mm
Height2100mm
Weight1350kg (Less Rope)
(Average Rope weight 500 kg)
W1-TEW25H-0099 Tower Erection Winch

Ordering Info

Product NoDescription
W1-TEW25H-0099Tower Erection Winch

NOTE:
Axle and wheels are suitable for site work only and not for using on a public highway. C/W Parking Brake.


Documents

W1-TEW-25H-0099